Using the pressure pot principle pre-mixed resin systems are drawn
into the machine under vacuum, actively degassed, then dispensed
under pressure into the mould cavity. Processing requirements of
single part epoxy materials such as Hexcel’s RTM6 and Cytec Engineered Materials have led to heated systems complete with higher levels of control and monitoring.
|
General Specification
The HypajectTM system is highly versatile:
- Standard 6 litre capacity homogenisers are complimented by
‘special order’ sizes, ranging from 0.3 to 30 litre.
- Removable joining seals permit easy maintenance.
- Internal venturi vacuum generator (to 100mBar abs) for
loading and degassing material.
- Capable of injecting at pressures ranging from 0.1 bar to 10
bar.
- Able to inject quantities from 50 to 6000cc.
- Standard heated machines have 150oC capability
with full PID control. Dependant upon specification.
- Range of monitoring instruments and outputs available
including weight, pressure and temperature.
- Suitable for use with virtually all thermosetting resin
systems,
including:- polyester, vinylester, methyl methacrylate,
phenolic, single and multi component epoxies.
|
To Determine the Machine Specification Choose from the Recommended
Configuration Options For Example:‑
Standard polyester, epoxy etc - Options 2,3,8
Standard polyester, epoxy with requirements for general heating
-
Options 2,3,8,9,10
Hexcel RTM 6 - Options 2,3,6,7,8,9,11,13
High visocity, single part epoxies - requiring heating prior to
processing - Options 2,3,6,7,8,9,12
Click here
to see the options available
 |
Part Ref: 2064 |
Print friendly version