Using the pressure pot principle, pre-mixed resin and catalyst are
drawn under vacuum into the machines homogeniser, actively degassed
and then dispensed under pressure into the mould cavity.
- Standard 3 & 6 litre capacity homogenisers are complimented by
‘special order’ sizes, ranging from 0.3 to 30 litre.
- Can inject as little as a cupful of pre-mixed
material.
- The homogeneous mixing will eliminate cure profile distortions
caused by inaccurate catalysation.
- Injection pressure is controllable.
Specification
- Incoming air, vacuum level & Injection pressure gauges.
- Injection indicator with injection pressure regulator.
- Internal air driven vacuum generator.
- Remote thumb control switch.
- Operates from 0.7lt/sec (1.5cfm) compressed air supply at 6 bar(90psi).
- Non moving part operation provides low maintenance service.
|
|
3 Litre Capacity, Part Ref: 1900
6 Litre Capacity, Part Ref: 1901
|