Designed for injecting polyester, vinylester and methacrylate
resins
and catalyst at controlled pressures. The Megaject SSB AutoHead
mixes on demand at the injection head with catalyst ratios
adjustable from 0.5% to 3.0% in increments of 0.5% and features
Pre-determined Counter, Resin Gel Alarm and Automatic Head with
internal interlocks on resin and catalyst valves.
Standard Features
- Full instrumentation housed in a stainless steel
control panel.
- Precision fluid pumps guarantee accurate metering across the full
6-9kg/min output range.
- Complete 2 stream mixing head with static mixer
element.
- Automatic, pneumatically controlled resin and
catalyst injection/recirculation valves at the mix head.
- Head auto valves include valve position indicators.
- Built in pneumatic interlocks on both auto head
valves provide guaranteed monitoring and security, by
preventing the possibility of machine operation without
resin or catalyst flow.
- Internal interlocks on both auto head valves prevent
the possibility of solvent getting into mould when
flushing the machine head.
- Resin Gel Alarm system (RGA) provides intelligent
visual and audible alarm conditions during and after
machine injection. Battery powered with low battery
power alarm.
- Pre-determined counter (PDC) with a count rate of
every 100cc. When the pre-determined count is reached
the machine stops automatically.
- Mould Pressure Guard (MPG) provides safe injection
pressures that are pre-determined by the operator, and
guards against excessive mould injection pressures
whilst limiting pressure in the machine to mould feed
pipe.
- Anti stall timer on RGA.
- Supplied with socket ready for connection to the
optional PVSensor, allowing precise mould pressure
control.
- Catalyst over-pressurisation provides an automatic
machine safety stop.
- Economic, single operation, air/solvent flush of
machine head.
- Resin inlet hose on swivel fitting. Resin pick up
wand suitable for 200kg drum.
- 8 litre catalyst bottle with flow indicator and filtered line.
- Safe, 20lt heavy-duty non-pressurised polypropylene
solvent tank featuring submersed (SP-3) solvent pump
system. Safely positioned, the frame mounted tank offers
visual level indication without the need to remove the
tank lid.
- Highly efficient solvent/air emulsifier ensuring lower solvent consumption per head flush.
- Stainless steel ratio arms offer single pin catalyst
ratio adjustment from 0.5% to 3.0%.
- Powder coated frame with lockable, heavy duty
castors.
- Emergency stop.
- Machine stability, guards and controls comply with
CE Machinery Directive.
-
PVSensor
compatibility with built in connector as standard.
- Designed to connect to, and control the
Turbo Autosprue automatic injection valve and
RollMateTM
roller saturator.
|
|
 |
|
|
|